Skip to main content

PCB Heated Bed

Block Image

These a great quality heated bed with a few extra features that you don't find on the more standard beds out there.

The first is that these are dual power and can be used with either 12v or 24v supplies, just choose the appropriate connection pads on the board.

A small hole in the very centre allows a thermistor to come through and be in direct thermal contact with the print surface so you can get the most accurate readings possible.

Finally there are 5 mounting holes, 1 at each corner, and another in the middle of one edge - this allows you to have either the more normal 4 point mounting, or alternatively a more easily levelled 3 point levelling system.

PCB Heated Bed MK2Y 12v - Round

Block Image

These a great quality heated bed with a few extra features that you don't find on the more standard beds out there.

A small hole in the very centre allows a thermistor to come through and be in direct thermal contact with the print surface so you can get the most accurate readings possible.

3 mounting holes, perfect for delta-style printers.

Power Supply: 12VDC

Resistance: 3.5 Ohms

Diameter: 220mm

Printing area: 200mm MK2Y

High Precision Heater Catridge

Block Image

A powerful heater for your HotEnd, with improved reliability and highly precise temperature output. A high-tolerance canister boosts thermal efficiency, while a built-in Molex connector makes removing your HotEnd from your 3D printer easier than ever.

Additional Data

Power: 30W

Length: 21mm

Diameter: 6mm

Lead length: 1000mm

Connector: Molex Microfit 3.0

Ferrule: E7608

Length from cartridge to connerctor: 143mm

View Statistics:

Past 24 Hours: 0

Past 7 Days: 9

Past 30 Days: 26

All Time: 700