Support Questions Ask a Question

There are no questions. Be the first to ask a question!

General ¶ 

SpoolWorks ABS provides a good balance of properties at an affordable price. Low ooze and strong with a satin finish.

Printing guidelines ¶ 

  • Print Temperature: 240°C
  • Bed Temperature: 120°C
  • Bed Adhesion: Glue stick on glass bed
  • Part cooling fan: Off

Mechanical properties ¶ 

PropertyValueUnits
Ultimate tensile strength:43Mpa
Young's modulus:2050Mpa
Fracture strain:11%
Impact strength:35kj/m2

Products within category ¶ 

TypePart #SupplierURL
SpoolWorks ABS Filament - 'Natural' 02F-SABS-NATURALE3Dhttps://e3d-online.com/spoolwork-abs-bas...
SpoolWorks ABS Filament - 'Basic' White 02F-SW-ABS-WHITEE3Dhttps://e3d-online.com/f-sw-abs-white
spoolWorks ABS Filament - 'Basic' Black 20F-SW-ABS-BLACKE3Dhttps://e3d-online.com/spoolwork-abs-bas...
SpoolWorks ABS Filament - 'Phonebox' Red 27F-SW-ABS-REDE3Dhttps://e3d-online.com/f-sw-abs-red
SpoolWorks ABS Filament - 'Sweet' Orange 17F-SW-ABS-ORANGEE3Dhttps://e3d-online.com/f-sw-abs-orange
SpoolWorks ABS Filament - 'Primary' Yellow 07F-SW-ABS-YELLOWE3Dhttps://e3d-online.com/f-sw-abs-yellow
SpoolWorks ABS Filament - 'Cricket' Green 16F-SW-ABS-GREENE3Dhttps://e3d-online.com/f-sw-abs-green
SpoolWorks ABS Filament - 'Oxford' Blue 22F-SW-ABS-BLUEE3Dhttps://e3d-online.com/f-sw-abs-blue
SpoolWorks ABS Filament - 'Lilac' Purple 14F-SW-ABS-PURPLEE3Dhttps://e3d-online.com/f-sw-abs-purple
SpoolWorks ABS Filament - 'Lining' Silver 16F-SW-ABS-SILVERE3Dhttps://e3d-online.com/f-sw-abs-silver

Additional notes ¶ 

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 16

All Time: 141