I’m having an issue where the hotend is about 50-60° hotter than it says it is reading on the Thermistor. I made sure to follow each step and went through the steps twice, but still came up with the same issue. At 205° my E3D is actually reading (with a laser gun) about 270°. And the filament is bubbling out and the PTFE tube is getting ruined inside. Already replaced once.
I made sure in Marlin to set “#define TEMP_SENSOR_0 5” …It seems to me like the thermistor reading is off.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
I have a UM2 clone. I’ve found a couple forums saying you can only use a PT100 Thermistor on Ultimakers? Is this true?
I’m having an issue where the hotend is about 50-60° hotter than it says it is reading on the Thermistor. I made sure to follow each step and went through the steps twice, but still came up with the same issue. At 205° my E3D is actually reading (with a laser gun) about 270°. And the filament is bubbling out and the PTFE tube is getting ruined inside. Already replaced once.
I made sure in Marlin to set “#define TEMP_SENSOR_0 5” …It seems to me like the thermistor reading is off.