E3D Titan Extruder and PETG?Struggling to get PPE to print using an E3D Titan extruder bowden setup and PETG. There’s one spot where there’s a lot of...
Answer to "Anycubic chiron - changing Hotend to E3D V6"The stock hotend is ~18 mm taller than the V6. To install mine, I simply designed a spacer to fit between the V6 and the stock mount, and got longer screws. The thermistor is the same (both use Marlin setting of “5”), and I swapped out the heater cart for the factory (has plug for breakout board).