Skip to main content
PLA Main Image

PLA

Spoolworks PLA is easiest to print with out of the whole Spoolworks range. Cheap, strong, and printable on practically any printer (no heated bed required) Spoolworks PLA is an excelent everyday printing solution.

Type Part # Supplier URL
spoolWorks PLA - 'Basic' Black20 F-SW-PLA-BLACK E3D https://e3d-online.com/spoolworks-pla-basic-black20
spoolWorks PLA Filament - Natural F-SW-PLA-NATURAL E3D https://e3d-online.com/f-sw-pla-natural
spoolWorks PLA - 'Basic' White02 F-SW-PLA-WHITE E3D https://e3d-online.com/spoolworks-pla-basic-white02
spoolWorks PLA - 'Light' Grey06 F-SW-PLA-GREY E3D https://e3d-online.com/spoolworks-pla-light-grey06
spoolWorks PLA - 'Greenish' Glow00 F-SW-PLA-GLOW E3D https://e3d-online.com/spoolworks-pla-greenish-glow00
spoolWorks PLA - 'Lining' Silver03 F-SW-PLA-SILVER E3D https://e3d-online.com/spoolworks-pla-lining-silver03
spoolWorks PLA - 'Phonebox' Red27 W-PLA-RED E3D https://e3d-online.com/spoolworks-pla-phonebox-red27
spoolWorks PLA - 'Sweet' Orange17 F-SW-PLA-ORANGE E3D https://e3d-online.com/spoolworks-pla-sweet-orange17
spoolWorks PLA Filament - Primary Yellow F-SW-PLA-YELLOW E3D https://e3d-online.com/f-sw-pla-yellow
spoolWorks PLA - 'Cricket' Green16 F-SW-PLA-GREEN E3D https://e3d-online.com/spoolworks-pla-cricket-green16
spoolWorks PLA - 'Royal' Blue42 F-SW-PLA-ROYALBLUE E3D https://e3d-online.com/spoolworks-pla-royal-blue42
spoolWorks PLA - 'Oxford' Blue22 F-SW-PLA-BLUE E3D https://e3d-online.com/spoolwork-pla-oxford-blue22

General

SpoolWorks PLA is easy to print with, offering good flow properties and beautiful colours. Low ooze, low warp, easy bonding at medium bed temperatures. Compatible with spoolWorks Scaffold support filament.

Printing Guidelines

  • Print Temperature: 190-220°C
  • Bed Temperature: 55°C to 70°C
  • Bed Adhesion: Glue stick on glass bed

Mechanical Properties

PropertyMachine direction (MD)Transverse directionUnits
Ultimate tensile strength:112143Mpa
Young's modulus:33503900Mpa
Fracture strain:155102%
Impact strength:7.6kj/m2

Additional Notes

PLA can be printed without a heated bed, but its still preferable to use one.

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 263