Skip to main content
Help

Range

No


Time Estimate

Select a difficulty level for this entire task (including any prerequisite instructions). The difficulty ranking reflects the experience, physical dexterity, and risk involved.

Very easy

Does not require opening device.

Easy

Requires minimal disassembly and requires only basic tools like a Phillips or flat-head screwdriver.

Moderate

Requires a fair amount of disassembly. This is a task that most people would not perform without instruction.

Difficult

Requires significant disassembly and may require specialized tasks like soldering.

Very difficult

This task is considered quite challenging, may require specialized tasks like micro-soldering, and may risk damage to the device. If you can do this, people may call you MacGyver on occasion.

  • Legends cold side WC
  • Chimera Hot Side

If your guide picks up where an existing guide leaves off, add the existing guide as a prerequisite to avoid having to write additional steps. Prerequisite guides will be displayed before this guide. Make sure that the prerequisite guides are in the correct order. You can change the prerequisite order by dragging the icons to the left of the guide's name.

  • 1 × Hex Wrench 2mm
  • 1 × Philips Screwdriver
  • 1 × Hex Wrench 1.5mm
  • 1 × Multimeter
  • 6 × Collet
  • 6 × Collet Clip
  • 2 × PTFE Tubing
  • 7 × M3x10 Socket Dome Screw
  • 1 × Cyclops Heatsink - Water-cooled
  • 1 × Nylon Tubing
  • 2 × Plastic Screws
  • 1 × 30mm Fan
  • 1 × Cyclops Heatsink
  • 6 × M3 Grub Screw
  • 2 × V6 Nozzles
  • 2 × Heater Cartridge
  • 2 × V6 Heater Block
  • 2 × Kraken Heat Break
  • 2 × Thermistor Cartridge
  • 2 × M3 Washer
  • 1 × Thermal Paste Sachet
  • 1 × Cable-Tie
  • 2 × Silicone HotEnd Sock
Add New