Skip to main content
Help

Notice: This guide has unpatrolled modifications. Before continuing, you should patrol pending changes.


Time Estimate

Select a difficulty level for this entire task (including any prerequisite instructions). The difficulty ranking reflects the experience, physical dexterity, and risk involved.

Very easy

Does not require opening device.

Easy

Requires minimal disassembly and requires only basic tools like a Phillips or flat-head screwdriver.

Moderate

Requires a fair amount of disassembly. This is a task that most people would not perform without instruction.

Difficult

Requires significant disassembly and may require specialized tasks like soldering.

Very difficult

This task is considered quite challenging, may require specialized tasks like micro-soldering, and may risk damage to the device. If you can do this, people may call you MacGyver on occasion.

If your guide picks up where an existing guide leaves off, add the existing guide as a prerequisite to avoid having to write additional steps. Prerequisite guides will be displayed before this guide. Make sure that the prerequisite guides are in the correct order. You can change the prerequisite order by dragging the icons to the left of the guide's name.

  • 1 × Multimeter
  • 1 × Hex Wrench, 2.5mmIncluded in Kit
  • 1 × Hex Wrench 1.5mmIncluded in Kit
  • 1 × Screwdriver, Philips Head
  • 1 × V6 Heater Block
  • 1 × V6 NozzlesBrass 0.40mm Nozzle
  • 1 × Lite6 Heatsink
  • 1 × Cable Tie
  • 1 × Collet
  • 1 × Collet Clip
  • 1 × Heater Cartridge
  • 1 × Thermistor Cartridge
  • 1 × Extension Wires
  • 1 × Fan Duct
  • 1 × M3x10 Socket Dome Screw
  • 1 × M3 Grub Screw
  • 4 × Plastic Screws
  • 1 × PTFE Tubing, 4mm ODFor 1.75mm Filament
  • 1 × Silicone sock
Add New