Skip to main content

Time Estimate

Select a difficulty level for this entire task (including any prerequisite instructions). The difficulty ranking reflects the experience, physical dexterity, and risk involved.

Very easy

Does not require opening device.


Requires minimal disassembly and requires only basic tools like a Phillips or flat-head screwdriver.


Requires a fair amount of disassembly. This is a task that most people would not perform without instruction.


Requires significant disassembly and may require specialized tasks like soldering.

Very difficult

This task is considered quite challenging, may require specialized tasks like micro-soldering, and may risk damage to the device. If you can do this, people may call you MacGyver on occasion.

If your guide picks up where an existing guide leaves off, add the existing guide as a prerequisite to avoid having to write additional steps. Prerequisite guides will be displayed before this guide. Make sure that the prerequisite guides are in the correct order. You can change the prerequisite order by dragging the icons to the left of the guide's name.

  • 1 × Pin Crimpers
  • 1 × 2.5mm Allen Key
  • 1 × 2mm Allen Key
  • 1 × 5v 40x10mm 5cfm+ fan, 5v 40x10mm 5cfm+ fan
  • 1 × molex sl 24-30 awg crimp-terminal pin x30
  • 1 × M3 Heat sets
  • 1 × 20pos Molex terminal
  • 1 × 50x50x15mm centrifugal blower fan
  • 6 × M3x12mm Socket Head Cap Screw
  • 2 × M3x20mm Socket Head Cap Screw
  • 5 × M3x10mm Flat Head Cap Screw
  • 4 × M3 washers
  • 1 × 18g ring terminal with at least 3mm hole
  • 1 × Mini 1 Universal adapter
  • 1 × Printed Lulzbot Hermes adapter
  • 1 × Printed Fan Duct
Add New