Skip to main content
Help
Editing Step 11 —

Step Type:

Drag to rearrange

Manual editing:

Change: #define MIN_DEFECT_TEMPERATURE 5 To detect a detached thermistor

Change: #define MAXTEMP 285 To prevents your hotend from overheating.

Change: #define MAX_DEFECT_TEMPERATURE 290 To shut off your printer if overheated.

Online Editing:

Change: Maximum extruder temperature 285 to prevent your HotEnd from overheating.

Change: Minimum defect temperature 5 To detect if thermistor is detached.

Change: Maximum defect temperature 290 To shut off your printer if overheated.