Skip to main content
Editing Step 4 —

Step Type:

Drag to rearrange

In the configuration.h file, find the Thermal Settings section. Below the comments you'll find the settings for the types of thermistors your printer uses. (Typically there will be one per hotend and one more if you have a heated bed.)

If you're installing your Lite6 as your only HotEnd, change the first highlighted line to: #define TEMP_SENSOR_0 5

If you're replacing an existing HotEnd or have multiple HotEnds, adjust whichever line corresponds to the tool number that you're changing (they start counting from 0)