Skip to main content
Help
Editing Step 32 —

Step Type:

Drag to rearrange

You're now ready to go! Remember you'll have to update your slicer settings a little:

Check your nozzle diameter in your slicer. All Lite6 kits ship with a 0.40mm brass nozzle.

Having very long retraction settings will cause problems.

For direct extrusion systems you should use anywhere from 0.5mm–1.0mm of retraction.

For bowden systems you can use up to 2.0mm of retraction.

Print PLAs at 205–215°C, and ABS at ~240°C. For other materials check with their manufacturer