Skip to main content
Help
Editing Step 1 —

Step Type:

Drag to rearrange

For this upgrade, you’ll need:

an Anet A8,

a Hemera kit,

four M3x5 or M3x6 screws and two M3x10 screws (or similar)

and either a soldering iron or a spare three-pin Dupont connector housing.

You’ll also need a Phillips 2 screwdriver, a 7mm, 10mm and 16mm spanner and a few hex keys.

As well as the printed parts from https://www.prusaprinters.org/prints/127...