Skip to main content
Help

Step Type:

Drag to rearrange

Strip about 3-4mm of insulation off each wire to prep for adding pins

Crimp the pins onto the wires using the appropriate crimpers and then add them to the 16 position socket following the wiring diagram

Pin 1 is the one shown here with the arrow at the top right. The diagram is numbered from the back so the pins will be facing away from you if you are looking at the numbers in the top left of the diagram.

We are jumping out the Xmax limit switch. This switch is not needed for normal operation and was not added in the Universal Adapter mount by Lulzbot.