Skip to main content
Editing Step 12 —

Step Type:

Drag to rearrange

Place a ferrule on each sleeved thermistor leg, if you have the flared mouth of the ferrule pointing away from the HotEnd it makes it easier to push them over the wires later.

Form the thermistor wire and bare portion of the thermistor legs into hooks, and hook the legs together.

Push the ferrule over the bare portions of the wires ready to crimp into place.

Crimp the ferrules by firmly crushing them with a pair of pliers. You can use a fancy ferrule crimping tool if you have one, but it's not needed. Repeat the process for the other leg.