• First things first: you're going to need a copy of RepRap Firmware.

    • Either download a fresh version from GitHub, or edit your existing one.

    • You can edit your existing firmware either through the online configuration tool, or through G-Code.

    • If you download a fresh version of RepRap Firmware you'll have to configure more settings than the ones mentioned in this guide so that it will work well with your printer.

  1. Manual Editing: For firmware versions 1.16 and earlier, send the folowing G-Code command to your printer: M305 P1 B4388
    • Manual Editing:

    • For firmware versions 1.16 and earlier, send the folowing G-Code command to your printer: M305 P1 B4388

    • For firmware versions 1.17 and later, send the following command instead: M305 P1 B4725 C7.060000e-8

    • Online Tool:

    • Click on the Calculate Thermistor Coefficients button in the Heaters tab, and select Semitec 104-GT2 (used by E3D) from the drop-down menu.

  2. Manual editing:
    • Manual editing:

    • Update your maximum temperature by sending the following G-Code command to your printer: M143 S285

    • While the V6's metal componants can handle very high temperatures, the included thermistor cartridge will strugle with temperatures over 285°C (if you want to go higher, get a PT100).

    • Online Editing:

    • Update your maximum temperature by going to the heaters tab and changing the option to 285.

    • Simply restart your printer for your new values to come into effect.

    • If you're unsure of how to update your printer's firmware, check with its manufacturer.

Conclusion

Head back to the V6 Assembly page to finish the last few steps before you start printing.

Gabe S.

Member since: 08/08/2017

13,312 Reputation

41 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 5

Past 7 Days: 46

Past 30 Days: 173

All Time: 2,598