Skip to main content
  1. First things first: you're going to need a copy of MK4duo.
    • First things first: you're going to need a copy of MK4duo.

    • If you are upgrading an existing 3D printer to use a V6 HotEnd, you should try to get a copy of your current firmware from your printer's manufacturer.

    • If you're building a new printer, or simply want to upgrade to the latest version of MK4duo, download it at https://www.marlinkimbra.it/

    • If you download a fresh version of MK4duo you'll have to configure more settings than the ones mentioned in this guide so that it will work well with your printer.

  2. Manual Editing:
    • Manual Editing:

    • Send the following command instead: M305 H0 B4725 C0.0000000706

    • Online Tool:

    • Click on Temp Sensor button in the Heaters tab, and select 100K thermistor - ATC Semitec 104-GT2 (used by E3D) from the drop-down menu.

Finish Line

One other person completed this guide.

Alberto

Member since: 03/03/2018

1 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 6

Past 30 Days: 23

All Time: 678