Skip to main content
    • First things first: you're going to need a copy of Smoothieware.

    • You can get your existing configuration file off the SD card in your printer.

    • If you're building a new printer, or simply want to upgrade to the latest version of Smoothieware, download it at http://smoothieware.org/getting-smoothie

    • If you download a fresh version of Smoothieware you'll have to configure more settings than the ones mentioned in this guide so that it will work well with your printer.

    • Unzip Repetier from the zip file you downloaded and put the resulting folder anywhere on your computer for safe keeping.

    • You're looking for the config file.

  1. On the SD card that contains your printer's firmware, update the configuration file with the following line: temperature_control.hotend.thermistor Semitec
    • On the SD card that contains your printer's firmware, update the configuration file with the following line: temperature_control.hotend.thermistor Semitec

    • Save the firmware to your SD card as you normally would. If you're having issues, check with your printer's manufacturer.

    • If you're unsure of how to update your printer's firmware, check with its manufacturer.

Conclusion

Head back to the Lite6 Assembly page to finish the last few steps before you start printing.

Gabe S.

Member since: 08/08/2017

13,635 Reputation

41 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 3

All Time: 96