Skip to main content
  1. Using the knob and LCD. Select control. Select temperature.
    • Using the knob and LCD.

    • Select control.

    • Select temperature.

  2. Select nozzle. Set the temperature to an appropriate value for the filament loaded. Return to the home screen and wait for the HotEnd to reach temperature.
    • Select nozzle.

    • Set the temperature to an appropriate value for the filament loaded.

    • Return to the home screen and wait for the HotEnd to reach temperature.

  3. Once the HotEnd is at temperature select Prepare Move Axis Select Extruder
    • Once the HotEnd is at temperature select Prepare

    • Move Axis

    • Select Extruder

  4. Rotate the knob counter clockwise to unload the filament. Pull with a small amount of pressure. Once the filament has cleared the hobb remove the filament swiftly to avoid plastic getting caught in the drive gears.
    • Rotate the knob counter clockwise to unload the filament.

    • Pull with a small amount of pressure.

    • Once the filament has cleared the hobb remove the filament swiftly to avoid plastic getting caught in the drive gears.

Finish Line

One other person completed this guide.

Dan Rock

Member since: 06/07/2018

21,817 Reputation

40 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 11

Past 30 Days: 50

All Time: 412